our foam materials

Below is a chart which describes most of the different foam materials we stock. Notice how an entirely different ILD (Firmness) rating can be produced using a foam material with similar density ratings such as our HR 2.5 density foam material which is available in a 30,40 or 50 lb ILD rating. This should illustrate the importance of the ILD rating in selecting a suitable foam for your needs. A high density foam is not necessarily the proper firmness just as a firm foam material is not necessarily a high density foam material. It is very important that you know all of the characteristics of a foam material to help you select the best foam type for your application and needs.

You will note that the ILD ratings of the foam materials in the chart range up to 70 lbs. While these very firm foam materials are available and have their specific and appropriate uses I would rarely recommend the use of any foam material higher than a 41 lb ILD rating for seat cushions that are greater than 2" thick.. The 50,61 and 70 lb ILD foam materials may be used for such applications as kneeler cushions or fitness equipment pads where the foam thickness is limited to 1-2" and the higher ILD rating is necessary to compensate for the limited thickness of the foam where elbows or knees will be grating into the foam on a regular basis. We also often recommend these foam materials for motorcycle, snomobile and RV seat cushions.

Many of our clients still have specific questions about selecting a foam type for their replacement cushions or how to measure cushions for replacement foam inserts. While we have tried to answer most of your questions here, we are also happy to help you over the telephone. We hope you will not hesitate to call us or send us an E-Mail to discuss your foam cushion needs if you need more help. We have over twenty years experience in the furniture reupholstery and furniture restoration business and we look forward to helping you select the right foam material for your replacement cushions.